<rp id="qnaul"></rp>
    1. <th id="qnaul"><pre id="qnaul"></pre></th>
    2. <rp id="qnaul"></rp>

    3. <button id="qnaul"></button>

      Engineering Edge

      Current Issue

      Volume 7, Issue 1

      Welcome to Volume 7, Issue 1 of Engineering Edge.

      In This Issue

      Engineering Edge

      Mentor, a Siemens Business, Emulation Division designs, manufactures and sells a hardware emulation system under the Veloce® registered trademark. A wide range of semiconductor and systems manufacturers... View Journal Article

      When designing or upgrading a building, there are several areas that require significant engineering to ensure they can operate in as green a manner as possible. One of these areas is the chilled water... View Journal Article

      There is an increasing market for appliances that are designed to cool beverages many times faster than a conventional refrigeration approach. When the liquid is prepackaged in a can or bottle, there are... View Journal Article

      Hitachi Chemical is one of the group of companies of Hitachi Ltd and we have about 19,000 employees with annual revenues of ~$5Bn/yr. About 50% of our business is in materials manufacture and 50% is in... View Journal Article

      FloEFD starts to make a lot of sense, especially for the internal pipe flow, where the SmartCells™ technology within  FloEFD really comes into play. SmartCells will recognize directly from the... View Journal Article

      Dell has been working on improving their IoT device (Internet of Things), Edge Gateway Model which helps with integration of IT and operation technology. The latest model 5100 from Dell is focused on creating... View Journal Article

      Power on pluggable optics modules (POMs) such as SFP+, QSFP+, QSFP28, CFP2, CFP8 has increased along with the demand for higher bandwidth. POMs give access at the faceplate to an optical signal. Existing... View Journal Article

      Volume 7, Issue 1

      Volume 6, Issue 2

      Welcome to Volume 6, Issue 2 of Engineering Edge.

      In This Issue

      Engineering Edge

      Ultrasound systems for diagnostic images have been around for several decades. They have advanced in the last twenty years to include much more sophisticated electronics that deals with high quality... View Journal Article

      FLIR Systems develops thermal imaging cameras and components for a wide variety of commercial and government applications. Depending on the end use, a product design might be driven by economical or... View Journal Article

      The Rover Environmental Monitoring Station (REMS) is part of the payload of the Mars Science Laboratory (MSL) rover, better known as the Curiosity rover, which landed on Mars in August 2012. REMS is... View Journal Article

      Like most space launch vehicles, the Korean Aerospace Research Institutes (KARI), NARO spacecraft uses liquid oxygen (LOX) and Kerosene as propellants. The two liquids are piped to the rocket motors separately... View Journal Article

      Brisbane  West Wellcamp Airport is the first international airport built in Australia in the last 50 years. The site is approximately 839ha in area and is located in hilly terrain with an elevation... View Journal Article

      At Team Bath Racing, we are a group of undergraduate engineers at the University of Bath who, each year design and build our own single-seat open wheeled race car to enter into Formula Student competitions... View Journal Article

      Volume 6, Issue 2

      Volume 6, Issue 1

      Welcome to Volume 6, Issue 1 of Engineering Edge.

      In This Issue

      Engineering Edge
      Journal Article

      Finding new ways to make our Products Cool! View Journal Article

      Journal Article

      With the release of V8, FloMASTER has introduced functionality to fully model ORC systems so that engineers can consider key design parameters such as available superheat, high and low side system pressures,... View Journal Article

      Journal Article

      When looking to analyze a thermo-fluid system one of the most important aspects to consider is: what will cause fluid flow in the system. This may be as simple as imposing a flow rate or using a difference... View Journal Article

      Journal Article

      The increased functionality and power dissipation has made the thermal design of communication device applications crucial in today’s increasingly high computing power communication device industry.... View Journal Article

      Journal Article

      Engineers at Irkut Corporation were looking for a way to get better external aerodynamics data than what they were currently able to get from tube experiments.  View Journal Article

      Journal Article

      2017 sees Team Velarde begin their third year in the championship. Pilot Juan Velarde is looking to build upon his impressive 2016 record where he took the top spot in qualifying in one round and proved... View Journal Article

      Journal Article

      Water treatment systems are designed to deal with feed water quality. They comprise mechanical sub-systems made up of pumps, filters and tanks which are connected by valves and pipework generally installed... View Journal Article

      Volume 6, Issue 1

      Volume 5, Issue 1

      Welcome to Volume 5, Issue 1 of Engineering Edge.

      In This Issue

      Engineering Edge

      A 3D model was constructed with a hand placed below a mass flow boundary condition applied to an underside face of a convective hand dryer part. Hot-dry air blown over the hand and a transient simulation... View Journal Article

      The increasing world energy demand and concerns over CO2 emissions have led to the search of sources alternative to coal and gas. The continuous increase of uranium production and demand (Figure 1) indicates... View Journal Article

      Liebherr Werk-Nenzing GmbH, manufacturer of maritime cranes, crawler cranes and foundation equipment, demonstrates the importance of modern “Frontloading“ simulation tools which go far beyond... View Journal Article

      The ever-shortening product cycles and decreasing development times in the automotive industry raise the need for up-to-date simulation tools equipped with reliable physical calculation methods. The use... View Journal Article

      It is commonly accepted that two of the trends in the electronics industry are miniaturization and the electrification of all things. As a result electronics today are deployed into dynamic and sometimes... View Journal Article

      Volume 5, Issue 1


      Volume 4, Issue 2

      Welcome to Volume 4, Issue 2 of Engineering Edge.

      In This Issue

      Engineering Edge

      The goal of electronics thermal design is to accurately predict component junction temperatures to ensure that they are within specification. Easier said than done. Before CFD was used, designers used simple... View Journal Article

      With design cycles and design margins ever shrinking there is a need to maximize efficiencies in every phase of the design process and as a result thermal design using CFD is typically part of the process.... View Journal Article

      The biggest bottlenecks in the analysis process are related to handling the complex geometries inherent in headlights and in turn creating a computational mesh of those geometries for analysis. Learn how... View Journal Article

      A familiar dilemma for any instrumentation engineer…you need to measure a system fluid property accurately but the very presence of instrumentation in the system affects the property that you are... View Journal Article

      A steam turbine control valve is used to control and manage the amount of steam allowed to enter the steam turbine and thereby produce a consistent power output. For this system, pressurized oil is used... View Journal Article

      Volume 4, Issue 2







      Volume 2, Issue 1

      Engineering Edge

      Designing an experimental capsule environment to assess the effects of bone density in space. View Journal Article

      How physical testing and CFD analysis helped develop new LED-based street lighting luminaires. View Journal Article

      From concept through to verification for electronic cooling simulation. View Journal Article

      The prestigious Harvey Rosten Award For Excellence was won by Andras Poppe, Mentor Graphics' Product Marketing Manager for MicReD® (Microelectronics Research and Development) group and faculty member... View Journal Article

      ECUs for vehicles and their components are becoming more complicated and intricate to produce energy-efficient and environmentally friendly cars. Successful thermal design is critical for manufacturers. View Journal Article

      Volume 2, Issue 1

      The ability to run FloMASTER via a third party application, such as Excel, has long been recognized by users as an invaluable productivity aid. It streamlines the post-processing effort and opens up the... View Journal Article

      Finding new ways to make our Products Cool! View Journal Article

      Dr. Schneider's primary products are visible parts for the car interior: air vent , stowage boxes, kinematic components, bezels, covers and trims, grills and window  frames. View Journal Article

      E-Cooling, an engineering consultancy firm based in Germany, has expertise in the thermal design of Power Electronics, Transformers and Chokes at the component level or at room level where the computational... View Journal Article

      With the release of V8, FloMASTER has introduced functionality to fully model ORC systems so that engineers can consider key design parameters such as available superheat, high and low side system pressures,... View Journal Article

      Vortex-induced vibrations (VIV), are caused by vortex shedding and can occur when long slender structures such as chimneys or car antennas are exposed to a flowing fluid. The repeated pattern of wind causes... View Journal Article

      When looking to analyze a thermo-fluid system one of the most important aspects to consider is: what will cause fluid flow in the system. This may be as simple as imposing a flow rate or using a difference... View Journal Article

      久久人人97超碰_国产精品综合色区_97色色影院_九九热线有精品视频6
      Chat | Contact